Official Wiko Lenny Stock Rom For SP-Flashtool __EXCLUSIVE__

How to Install Official Wiko Lenny Stock Rom For SP-Flashtool

If you own a Wiko Lenny smartphone and want to restore it to its original state, you can use the official stock firmware provided by Wiko. The stock firmware can help you fix various issues such as bootloop, software errors, IMEI problems, or dead phone. In this article, we will show you how to download and install the official Wiko Lenny stock rom for SP-Flashtool.

What is SP-Flashtool

SP-Flashtool is a software tool that allows you to flash or install firmware on MediaTek (MTK) devices. It supports various formats of firmware such as scatter files, bin files, or pac files. You can use SP-Flashtool to upgrade or downgrade your device's software, or to unbrick your device if it is stuck on the logo or boot screen.

What is Wiko Lenny Stock Rom

Wiko Lenny stock rom is the official firmware that comes pre-installed on your device when you buy it from the factory. It contains the operating system, drivers, apps, and settings that are optimized for your device. By flashing the stock rom, you can restore your device to its original condition and remove any customizations or modifications that you have made.

How to Download Wiko Lenny Stock Rom

To download the official Wiko Lenny stock rom for SP-Flashtool, you need to follow these steps:

Go to this link and choose the version of the stock rom that matches your device model and region.

Click on the \"Get Link\" button and wait for a few seconds until the download link appears.

Click on the download link and save the zip file on your computer.

Extract the zip file using a tool like WinRAR or 7-Zip and you will get a folder containing the firmware files.

How to Install Wiko Lenny Stock Rom

To install the official Wiko Lenny stock rom for SP-Flashtool, you need to follow these steps:

Download and install the SP-Flashtool on your computer.

Download and install the MTK USB Driver on your computer.

Turn off your device and remove the battery (if possible).

Launch the SP-Flashtool and click on the \"Scatter-loading\" button.

Browse to the folder where you extracted the stock rom and select the scatter file (usually named MT6572_Android_scatter.txt).

The firmware files will be loaded on the SP-Flashtool. Make sure all the boxes are checked and click on \"Download\".

Connect your device to the computer using a USB cable while holding the volume down or volume up button (depending on your device).

The flashing process will start and you will see a progress bar on the SP-Flashtool.

Wait until you see a green tick mark indicating that the flashing is complete.

Disconnect your device from the computer and reboot it.

Congratulations! You have successfully installed the official Wiko Lenny stock rom for SP-Flashtool on your device. You can now enjoy the original features and performance of your device. 061ffe29dd